Medical 3D Printing: Techniques, Advances, Applications, Challenges, and Regulatory Implications
DOI:
https://doi.org/10.47611/jsrhs.v13i2.6444Keywords:
Medical 3D Printing, Bioprinting, 3D PrintingAbstract
3D printing is transforming the medical field. This publication covers its essence, applications, regulations, and challenges. We discuss its origins, advantages, patient-specific products, and regulatory insights. We also explore biological material printing, organ transplantation, and drug research. This technology has the potential to revolutionize healthcare, but further research and collaboration are needed.
Downloads
References or Bibliography
Daley, S., & Powers, J. (n.d.). 3D Printing: What It Is, How It Works and Examples. Built In. Retrieved December 28, 2023, from https://builtin.com/3d-printing
Little, M., & Wallace, G. (n.d.). Printing the future: 3D bioprinters and their uses. Printing the future: 3D bioprinters and their uses. https://www.science.org.au/curious/people-medicine/bioprinting
FDA Approves The First 3d Printed Drug Product. (2015, August 3). Aprecia Pharmaceuticals. Retrieved December 28, 2023, from https://www.aprecia.com/news/fda-approves-the-first-3d-printed-drug-product
Learn if a Medical Device Has Been Cleared by FDA for Marketing. (2017, December 29). FDA. Retrieved December 27, 2023, from https://www.fda.gov/medical-devices/consumers-medical-devices/learn-if-medical-device-has-been-cleared-fda-marketing
CFR - Code of Federal Regulations Title 21. (n.d.). CFR - Code of Federal Regulations Title 21. Retrieved December 27, 2023, from https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/CFRSearch.cfm?CFRPart=890&showFR=1&subpartNode=21:8.0.1.1.32.4
What Is Medical 3D Printing—and How Is it Regulated? (2020, October 5). The Pew Charitable Trusts. https://www.pewtrusts.org/en/research-and-analysis/issue-briefs/2020/10/what-is-medical-3d-printing-and-how-is-it-regulated
Becher, B. (2023, September 29). 3D-Printed Organs: Are We Close? Built In. Retrieved December 28, 2023, from https://builtin.com/3d-printing/3d-printed-organs
D Bioprinting: Bioink Selection Guide. (n.d.). Sigma-Aldrich. Retrieved December 27, 2023, from https://www.sigmaaldrich.com/US/en/technical-documents/technical-article/cell-culture-and-cell-culture-analysis/3d-cell-culture/3d-bioprinting-bioinks
Agarwal, S., Saha, S., Balla, V. K., Pal, A., Barui, A., & Bodhak, S. (2020, October 30). Current Developments in 3D Bioprinting for Tissue and Organ Regeneration–A Review (A. Bandyopadhyay, Ed.; Vol. 6). Frontiers. https://doi.org/10.3389/fmech.2020.589171
Ferris, C. J., Gilmore, K. G., Wallace, G. G., & Panhuis, M. i. h. (2013). Biofabrication: an overview of the approaches used for printing of living cells. https://ro.uow.edu.au/cgi/viewcontent.cgi?article=1580&context=smhpapers
Published
How to Cite
Issue
Section
Copyright (c) 2024 Dyuti Venkat
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright holder(s) granted JSR a perpetual, non-exclusive license to distriute & display this article.
